AUTOMATISM AND RECORDERS

local automatism

application
Simple solution with the management of pumpings, L cleansing and overpressure, the RS4 :

Control starting and L stop from 1 to 4 groups (16 thresholds).
Provides L power supply of the sensor.
Carry out L posting direct of measurement, and value while running.
Manage the permutations.
Takes into account the defects groups and measurements.
S adapts to tariffings full hours/off-peak hours.
Allows an operation moving and stops forced.
Integrate L use of emergency power units.

simple and reliable use

Its parameter setting by a levelling keyboard of 11 keys, and the direct reading of information on its screen LCD confers an extreme simplicity to him.
Its management of emergency power units, its monitoring of startings of machines, its capacity to start forced steps or stops, like its system of temporization, ensure a total reliability to him.

robust

This material profits from guarantee PARATRONIC 2 years, including risk of the lightning⁽¹⁾.

documentation

card commercial RS4

⁽¹⁾ the protection of the power supply 220 with PRO TAS220 and the loop with PRO TAS30 are imperative.

relay of thresholds

application
Usable with any type of sensor delivering a current of measurement 4-20 my, these relays of thresholds allow either the automation of orders in relation to measurement, or the indication of the points of instructions.

With or without adjustment of hysteresis, the relays of thresholds authorize the walk or the stop of materials to the fixed values.
For the relays of order, the exits with dry contacts 5A 230 V reduce the need for relayage considerably.

simple and reliable use

Relays of order or relays of alarm, materials PARATRONIC are protected from the industrial parasites and the atmospheric disturbances.
Even provided with the functions permutation or degraded walk, the implementation and the use of relays PARATRONIC remain extremely simple.

robust

Used according to our regulations, the relays of thresholds are guaranteed two years including risk of the lightning ⁽¹⁾.

⁽¹⁾ the protection of the power supply 220 with PRO TAS220 and the loop with PRO TAS30 are imperative.

Réf.	Case	Nb sections skeletal	Tempo. permutation	Exits	Specificities	Alim.	Impedance of entée acceptable

RS1	35 mm Rail_DIN	1 Section (2 thresholds)	Not	1 make-break contact 5A 230V	Indication of the order by indicator.	230V~	115 Ohms with 20mA
RS1T	35 mm Rail_DIN	1 Section (2 thresholds)	Tempo.	1 make-break contact 5A 230V	Indication of the order and temporization by indicators.	230V~	115 Ohms with 20mA
RA2	35 mm Rail_DIN	2 thresholds independent	Not	2 make-break contacts 5A 230V Hysteresis fixes 5%	Indication of the order by indicators Adjustment of the thresholds from 0 to 100%,	230V~	115 Ohms with 20mA
RS2 RS2A	70 mm Rail_DIN	2 Sections (4 thresholds)	Not	2 make-break contacts 5A 230V 1 defect signal 300mA 230V	Indication of the order and the defect by indicators.	230V~	105 Ohms with 20mA
RS2T RS2TA	70 mm Rail_DIN	2 Sections (4 thresholds)	Tempo. Permutation	2 make-break contacts 5A 230V 1 defect signal 300mA 230V	Indication of the order, the defect and temporization by indicators. Go or stop on defect signal.	230V~	105 Ohms with 20mA
RDA2	105 mm Rail_DIN	2 thresholds independent	Not	1 exit 4/20mA proportional to the difference of the 2 entries 2 make-break contacts 5A 230V 1 defect signal 5A 230V	Entées Insulation/Left/power supply 400V 50Hz. Indication of the order and the defect by indicators.	230V~	Tension delivered 19 with 35V
OPUS	105 mm Rail_DIN Transducer	3 Sections (6 thresholds)	Tempo. Permutation	3 make-break contacts 5A 230V likely to be stripped 1 defect signal 5A 230V likely to be stripped	Numerical Ultrasound unit, automatism Screen LCD and Keyboard.	24V~	Digital link
RS4	210 mm Rail_DIN	2x4 Sections (16 thresholds)	Tempo. Permutation Help	4 make-break contacts 5A 230V 1 defect signal 5A 230V	Directly post measurement and the current. Takes into account the defects groups and measurements. Adapt to tariffings full hours/off-peak hours. Allows an operation moving and stops forced. Integrate the use of emergency power units.	230V~	Tension delivered 20V